(888) 726-5910    Email    Live Chat    Order Status   

Audio-Technica

Audio-Technica AT8035 Line and Gradient Shotgun Condenser Microphone - is currently on backorder. You may still purchase now though and we'll ship as soon as more become available.

In Stock & Ready to Ship!



(888) 726-5910    Email    Live Chat


Brand New ConditionMore InfoThis product is in the box as received from the manufacturer and comes with the original warranty.

  • 369mm Shotgun Microphone, designed for video production and broadcast (ENG/EFP) audio acquisition
  • Provides the narrow acceptance angle desirable for long-distance sound pickup
  • Captures sound with high intelligibility in noisy environments with its excellent sound rejection from the sides and rear of mic
  • Two power modes (battery or phantom power) for versatility
  • 80Hz low-frequency roll-off, with a slope of 18dB / octave to reduce pickup of low-frequency ambient noise
  • Effective protection against interference from nearby mobile phones and other unwanted radio frequencies
  • Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carry case

The AT8035 is ideal for videos and movies but should be installed outside of the image, in other words, out of camera range. This type of microphone, provided with an interference tube in front of the capsule, which cancels a large part of its off-axis. Audio-Technica's Line and Gradient Condenser Microphones combine a directional capsule ("gradient") and an interference tube which removes the sound from the rear. Generally, the interference tube of this type of microphone can be extended to reduce the acceptance angle and thus increase the sound capture distance. Short condenser microphones do not have as long a range as shotgun models, but in some cases are preferred for their greater acceptance angle, when the accuracy of the source is less important.

Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Line + gradient
Frequency Response: 40-20,000 Hz
Open Circuit Sensitivity: Phantom: -38 dB (12.5 mV) re 1V at 1 Pa Battery: -39 dB (11.2 mV) re 1V at 1 Pa
Impedance: Phantom: 250 ohms Battery: 300 ohms
Maximum Input Sound Level: Phantom: 132 dB SPL, 1 kHz at 1% T.H.D. Battery: 120 dB SPL, 1 kHz at 1% T.H.D.
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Switches: Flat, roll-off
Dynamic Range: Phantom: 110 dB, 1 kHz at Max SPL Battery: 98 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio: 72 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 2 mA typical
Battery Type: 1.5V AA/UM3